Skip to main content
Zoom the image with the mouse

| SPA-D1000

Hanwha Vision SPA-D1000 IP audio module with built-in amplifier, edge storage PoE/PoE+ and VoIP support

£369.00
£442.80 inc VAT
Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.

Transmit IP audio across a network through passive and analogue speakers with this audio module featuring a built-in amplifier, PoE+ support and alarm outputs. Configure, play and schedule audio files via the included Wisenet Audio Management System.

  • Enables passive and analogue speakers to be used on an IP network
  • PoE/PoE+ support simplifies installation
  • Built-in 10w Class D amplifier
  • Connect analogue amplifiers for even greater volume
  • MicroSD card support allows upload of audio files
  • Hanwha Vision 5-year warranty
Hurry! Only left
 

Overview of Hanwha Vision SPA-D1000 IP audio module

  • Allows passive and analogue speakers to be used as part of an IP-based audio network
  • Upgrade existing speaker systems through seamless integration
  • Simple and cost-effective installation with PoE/PoE+ support
  • Wisenet Audio Management System included, fully integrated with Wisenet VMS
  • Hanwha Vision 5-year warranty

Installations which can benefit from the additional capabilities of IP audio added to their existing speaker systems can take advantage of this cost-effective audio module from Hanwha Vision. Equipped with a built-in amplifier, the module can power passive and analogue speakers whilst facilitating network connection via PoE/PoE+. The included Wisenet Audio Management System provides a user-friendly interface for configuration and scheduling of audio announcements and background music. Integration with Wisenet VMS helps operators respond faster to events detected by network cameras, allowing them to audibly address concerns such as unwanted behaviour and intruders. Additionally, on-board storage is supported with a microSD card (not included) where audio files can be uploaded to the software to create a personalised IP audio library.

Audio Capabilities

Equipped with a built-in 10w Class D amplifier, the module is capable of adequately powering passive speakers, however an additional analog amplifier can also be connected to facilitate greater volume levels. The built-in embedded microphone allows users to perform sound status health checks to maintain the effectiveness of their system.

Recording and Audio Management

On-board microSD card support allows users to upload audio files to develop a personalised library tailored specifically to their application for clip playback or audio soundscape. Seamless integration of the included Wisenet Audio Management System with Wisenet VMS enables audible alert messages to be played upon detection of events by cameras within the network.

Further recording and audio management options for this module:

Example Use Cases

  • Existing analogue audio networks - affordably convert an analogue audio network to transmit IP audio without having to replace speakers.

Accessories included

  • Audio module
  • Installation guide
  • Terminal connectors
Back To Top
 
 

Key technical features of the Hanwha Vision SPA-D1000 IP audio module

Audio Module

Environment: indoor/outdoor use
Type: audio module
Power: PoE (IEEE 802.3 af type 1 Class 3)
PoE+(IEEE 802.3 at type 2 Class 4)

Audio Hardware

Frequency range: 20 Hz - 20 kHz
Built-in microphone: Embedded microphone for sound testing
Amplifier description: Built-in 10 W Class D amplifier

Audio Software

Supported audio format: WAV, MP3 in mono/stereo from 64 kbps to 320 kbps.
Sampling rate from 16 kHz up to 48 kHz.

General

Dimensions: 123(W)*80(H)*30.6(D)mm
Weight: 0.24Kg
On-board storage: Internal memory: 1GBytes
MicroSD card up to 32GB (not included)
Operating temperatures: --20 ~ +50℃ (-4°F ~ +122°F)
Warranty: 5-year
VoIP: Tested with SIP clients such as Grandstream, Yealink, Cisco, MicroSIP softphone and PBX supplier such as Asterisk
Tested with SIP client such as Grandstream and PBX supplier such as Grandstream
Supported SIP features: DTMF (RFC2833)
Supported codecs: PCMU, PCMA, speex/8000, speex/16000
Health monitoring: Sound level meter (via embedded microphone)
Protocols supported: IPv4, HTTP, SIP, mDNS, DNS, NTP, TCP, UDP, DHCP, ARP, ICMP
Security: Password protection : admin, setup, user, guest (sha-2, Digest authentication, User access log) Digest authentication, User access log

Frequently bought together with this product

We're here to assist you
Speak to one of our experts, call us on 0151 633 2111