Skip to main content
Zoom the image with the mouse

| IPG1032ESX3

LILIN IPG1032ESX3 indoor 3-megapixel day/night IP camera with SenseUp technology, face detection and 2-way audio, PoE

Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.
Hurry! Only left
 

This product is discontinued, for alterative models please see Wisenet IP Cameras

Overview of the LILIN IPG1032ESX3

LILIN's IPG1032ESX3 compact box IP camera delivers high resolution surveillance in changing light conditions. Part of the iMEGAPRO range it captures high quality 3-megapixel video and features LILIN's SenseUp Plus technology to increase its light sensitivity, allowing it to maintain colour video in extremely low light. In addition, true day/night switching allows the camera to integrate with infrared lamps, and with wide dynamic range, ensures that high-contrast lighting can be dealt with as well. This camera is capable of capturing clear video regardless of the lighting scenario.

The IPG1032ESX3 also features LILIN's face detection software. This system can trigger camera actions whenever faces are detected in the video image, allowing automated differentiation between conventional motion and genuine intrusion. Operators can then challenge intruders from a safe distance through the camera's 2-way audio system (external speaker required).

Please note: This camera does not include a power supply. If you require a Power over Ethernet midspan, please select one from the options above.

Key features & benefits

  • Full HD and 3MP resolution - captures high-resolution video feeds with clear and sharp detail
  • SenseUp Plus Technology - improves light sensitivity and captures colour video in very low light conditions
  • True day/night switching - to further increase light sensitivity, the camera can capture infrared light at night to produce monochrome video footage (IR-cut filter is removable)
  • Face detection - automatically trigger camera alarm events whenever faces are in view
  • 2-way audio - use the camera as a means of communication between control rooms and subjects in view
  • Noise reduction software - clear up the signal noise common in low light video to improve definition and visibility
  • Wide dynamic range - suited to areas with strongly contrasting light such as bright, sunlit areas with dark shadows
  • Analogue video out - 75 ohm, BNC connector

Typical applications

This camera suits indoor environments where high quality and high resolution video is needed and where locations are subject to changeable or otherwise demanding light conditions. For example at warehouse entrances, hotel foyers, windowed corridors and shopping centres. Additionally, when used with a suitable outdoor housing, the camera is ideal for locations including external door security, car park monitoring and traffic surveillance.

Compatible recording platforms

Included accessories

Back To Top
 

Key technical features for the LILIN IPG1032ESX3

Camera
Environment: Indoor (or outdoor with a suitable housing)
Type: Fixed box-type camera
Sensor: 1/2.8" CMOS image sensor
Lens: 2.8-8mm (F1.2) CS-mount lens with 100.1 - 35.8° horizontal viewing angle
Audio: 2-way audio using G.711 compression
Power: IEEE802.3af Power over Ethernet or 12V DC
Processor/memory: Embedded 528MHz SoC ARM11 processor with 256MB RAM and 256MB flash memory
Compatibility: Windows 2000, XP, Vista and 7 using Internet Explorer 6 or above
Video
Resolution: 2048x1536, 1920x1080, 1280x720, 720x480 and 352x240
Compression: H.264 and MJPEG
Frame-rate: 15fps @ 2048x1536. 30fps below
Day/night: True day/night with switchable infrared-cut filter
Minimum illumination: 0.1 lux (F1.2, low-light mode)
Digital zoom/PTZ: Full digital pan, tilt and zoom with Region of Interest (RoI)
Analogue video out: 75 Ohm (1V p-p), BNC
Viewing, detection & recording
Privacy masking: Yes (4 zones)
Simultaneous users: 8
Alarm detection: Motion, tampering and face detection
Alarm notifications: Image upload via FTP and email
On-camera recording: SD/SDHC cards up to 32GB
Recording software included: LILIN CMX software
Compatible recording platforms (not included)
Software: Milestone XProtect (Using ONVIF driver)
Connections
Power: Jack port for 12V DC
Network: 10/100Mbps RJ-45 Ethernet connection with PoE support
Alarm I/O: Terminal connections for 1x input and 1x output
Audio: 2x 3.5mm mini-jack connections
Analogue output: BNC port
Other
Dimensions: 50mm x 70mm x 122mm (camera body only)
Weight: 550g
Warranty: 3 years manufacturer's warranty
Mounting methods: Wall or ceiling mount (mounting bracket included)
Operating temperatures:-25 to 50°C
Power consumption: 12V DC: 6W. PoE: 7.5W
Dynamic DNS: Yes
Protocols supported: IP, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ONVIF, ICMP and IGMP
QoS: No
Security: Multiple user access levels with password protection
System integration: LILIN HTTP API
ONVIF compliant: Yes
We're here to assist you
Speak to one of our experts, call us on 0151 633 2111