Skip to main content
Zoom the image with the mouse

| PD-AS-801/12

PowerDsine PD-AS801/12 High Power PoE active splitter

Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.
Hurry! Only left
 

This product is discontinued, for alternatives please see Power over Ethernet (PoE) for IP CCTV

The PowerDsine PD-AS801/12 High-Power PoE Splitter is used in conjuction with PowerDsine PD8001/8006/8012 High Power Midspans. An Ethernet cable run from a PoE midspan carries both data and power. This device splits the data from the power which is being received from an Ethernet cable carrying both. Using a PoE Splitter allows IP cameras with no built-in PoE support to be used in a PoE set up. Power over Ethernet provides a cost effective method of installation and gives greater flexibility of camera location.

Note that when using the PD-AS801/12 High-power PoE Splitter with a compatible midspan the voltage is regulated per device. This means that it cannot supply a higher voltage than the device requires giving protection against accidentally blowing the device. Note that the PD-AS801/12 cannot be used with a standard PoE IEEE802.3af switch.

Key benefits of Power over Ethernet (PoE):

  • Using a standard CAT5 Ethernet cable you can run both the data and power to your IP camera. This means that you can install your network camera using only one cable
  • Using PoE provides flexibility of installation. Cameras can be installed in areas where conventional electrical cabling or outlets are unavailable or difficult/expensive to install
  • A simplified cable installation significantly reduces installation time and costs

PowerDsine PD-AS801/12 - Connections:

  • Input connector: RJ-45
  • Output data cable with RJ-45 connector
  • Output power cable with DC connectors: 5.5x3.3x1 and 5.5x2.5 included

PowerDsine PD-AS801/12 - Key technical data:

  • Input voltage: 48V power input
  • Output voltage: DC voltage 12V output
  • Output power continuous: 22W Output power peak: 26W (up to 10 sec.)
  • Dimensions (HxWxD): 33mm x 75 mm x 120 mm
  • Operating temperature: 0° to 40° C
Back To Top
 
We're here to assist you
Speak to one of our experts, call us on 0151 633 2111