Skip to main content
Zoom the image with the mouse

| SPE-420

Hanwha Vision SPE-420 4-channel network video encoder with H.265, H.264, MJPEG codec support, HDMI out and PoE

£294.00
£352.80 inc VAT
Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.

Ideal for security installations using legacy devices, this 4-channel encoder converts analogue video to IP and supports two-way audio via its integrated I/O ports.

  • 4-channel support
  • Convert analogue video to IP
  • Maximum resolution: 5MP
  • Maximum framerate: 12 fps
  • HDMI output for local display
  • Hanwha Vision 5-year warranty
Hurry! Only left
 

Overview of the Hanwha Vision SPE-420 video encoder

  • Converts analogue video to IP
  • Encodes up to 4 channels
  • Integrated audio I/O ports
  • Hanwha Vision 5-year warranty
  • Dimensions: 178 × 34 × 127.8 mm

Enabling the conversion of up to 4 camera channels from analogue to IP, the Hanwha Vision SPE-420 network video encoder supports H.265, H.264, and MJPEG compression formats and framerates up to 30 fps. Compatible with all camera resolutions up to 5MP, this encoder is ideal for smaller businesses with an existing analogue camera setup that wish to convert to IP. Furthermore, two-way audio is available via the audio I/O ports when a microphone and speaker are connected, giving users the ability to record sound and communicate through connected cameras.

To improve scene awareness, this encoder enables a range of configurable, camera-based video motion detection alarms to be set, alerting users to activity via email. A built-in HDMI output facilitates the connection of an external monitor to either publicly display the camera stream in a retail setting or to allow it to be monitored in a control room. Additionally, multi-stream support is available, allowing multiple cameras to be streamed at once.

Key features & benefits

  • Supports the conversion of up to four analogue channels to IP
  • Compatible with H.265, H.264 and MJPEG compression formats
  • Up to 30 fps supported
  • Compatible with resolutions up to 5MP
  • Integrated I/O ports enable two-way audio
  • Motion detection alarms can be set to trigger email notifications
  • HDMI output allows an external monitor to be connected
  • Stream multiple cameras at once with multi-stream support

Typical applications

This encoder is an ideal solution for smaller businesses looking to convert their existing analogue security installation to an IP-based system and utilise the benefits of network security.

Back To Top
 

Key technical features for Wisenet SPE-420 video encoder

Encoder

Environment indoor
Power: max 5W
Memory: no info given

Video

Resolution: 2560x1920, 2560x1440, 1920x1080, 1280x720, 928x480(N), 928x240(N), 704x480(N), 704x240(N), 640x368, 352x240(N) 928x576(P), 928x288(P), 704x576(P), 704x288(P), 640x368, 352x288(P)
PTZ: not given
Compression: H.264 (MPEG-4 Part 10/AVC), H.265 (MPEG-H part 2/HEVC), Motion JPEG
Image settings: privacy masking, de-interlacing
Frame-rate: main stream 5MP: 12fps/CH, 4MP: 15fps/CH, 1080p/720p/WD1/4CIF/CIF: 30fps/CH(N), 25fps/CH(P) - sub Stream WD1/4CIF: 30fps/CH, 2CIF/CIF/QVGA/QCIF: 30fps/CH(N), 25fps/CH(P) - MJPEG: 2fps @ 640x368, 352x240, SD camera: 2fps @ 480x240, 352x240

Viewing, detection & recording

Video streaming: multiple streaming (up to 2 profiles per channel) in H.264, H.265 and Motion JPEG
Simultaneous users: not given
Alarm trigger: motion detection, alarm input, video loss, tampering, network disconnect
Alarm actions: file upload via FTP, E-mail
Card recording: no info given
Bandwidth control: no info given

Connections

Power: max 5 W
Network: 1 RJ-45 10/100 Base-T
Video: 4CH BNC, 1.0 Vp-p / 75Ω composite NTSC/PAL
Other: CVBS, AHD/CVI/TVI (1, 2, 4, 5MP) auto detection video out 1 HDMI OUT (4 multi-image, 1920x1080) 4 line input / 1 line output (1 NO/COM/NC, 1 NO/COM)

Other

Dimensions: 178 × 34.0 × 127.8 mm
Weight: 0.52kg
Casing: dark grey metal casing
Warranty: 5 years
Operating temperatures: -10°C ~ +50°C / 20% ~ 80% RH
Power consumption: MAX: 5W (12V, 0.417A)
Protocols supported: TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTCP, RTSP, NTP, HTTP, HTTPS, SSL/TLS, DHCP, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, QoS, UPnP, ONVIF, Bonjour
Security: HTTPS (SSL) Login Authentication, Digest Login Authentication IP Address Filtering, User Access Log, 802.1X Authentication (EAP-TLS, EAP-LEAP)
Software: no info given
ONVIF compliant: yes
Mounting: standalone, rackmount or wall mount
We're here to assist you
Speak to one of our experts, call us on 0151 633 2111